1 Series 128i (N52K) Convertible
51 23 105
Removing and installing/replacing right
hood/bonnet lock
Warning!
Scalding hazard!
Only perform work after engine has cooled down.
Release screws (1) and remove intake duct (2).
Release screws (3) and feed out hood/bonnet lock (4) sideways.
Tightening torque 51 23 2AZ
.
Note:
Engine hood/bonnet lock (2) shown without attachment parts for
purposes of clarity.
Disengage Bowden cable (1) from hood/bonnet lock (2).
RA Removing and installing/replacing right hood/bonnet lock
BMW AG - TIS
18.01.2013 06:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
