Removing And Installing Window Cavity Cover Strip For Rear Door Window
Important!
Risk of damage!
If reusing the existing window cavity cover strip (3), make
sure it is not bent.
Release side trim panel lower section (1) at top in area of B-pillar
and pull inwards.
Release catch (2) and, starting at front, pull off window cavity
cover strip (3) towards top.
Installation:
Moisten window cavity cover strip (3) prior to fitting with
approved anti-friction agent .
Make sure window cavity cover strip (3) is correctly seated.
Installation:
Catch (1) must not be damaged.
RA Removing and installing/replacing window cavity cover strip for door window, rea
BMW AG - TIS
18.01.2013 06:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
