1 Series 128i (N52K) Convertible
51 61 ...
Removing and installing/replacing protective
skid
Important!
Observe safety instructions for raising the vehicle
Driving without the protective skid is not permitted!
Necessary preliminary tasks:
•
Remove front underbody protection
Release screws (1) and remove protective skid (2).
Installation:
Replace all screws.
Tightening torque 51 71 12AZ
.
RA Removing and installing/replacing protective skid
BMW AG - TIS
18.01.2013 07:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
