1 Series 128i (N52K) Convertible
64 53 701
Replacing line from evaporator to compressor
(N52K)
Warning!
Risk of injury!
Refrigerant circuit is under high pressure!
Follow safety instructions for handling R 134a refrigerant .
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant oil.
Important!
Risk of damage!
Restart engine only when A/C system has been correctly
filled.
Follow instructions for opening and replacing parts in
refrigerant circuit.
If A/C system is opened for more than 24 hours:
Replace desiccant insert for A/C system
Necessary preliminary tasks:
•
Drawing off, evacuating and filling the A/C system are not
included in the time value given for this work operation
•
Remove intake filter housing
•
Remove fan cowl
•
Detach reservoir for power steering fluid from bracket
Release screw (1).
Tightening torque 64 53 2AZ
.
Release nuts (2) and remove refrigerant line (3).
Installation:
Replace sealing rings and moisten with refrigerant oil.
RA Replacing line from evaporator to compressor (N52K)
BMW AG - TIS
18.01.2013 09:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
