3 Series E30 316i (M40) SAL
Replacing bush in conrod (M40):
Press out old bush with a suitable mandrel.
Press in new bush.
Bush gap may be positioned optionally at point A or B.
Drill oil bore (1) (
∅
distance A = 6 mm) and deburr edges of bore at
sliding surface of bush.
Ream bush open to
∅
B = 22.005 ... 22.010 mm
RA Replacing bush in conrod (M40):
BMW AG - TIS
18.01.2013 21:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -