3 Series E30 318i (M10) SAL
86 10 ...
Disassembly of left and right lamp housings
Cut through sealing compound (1) and remove.
Drill out rivet connections (2).
Installation:
Use Sikaflex 221 as sealing compound.
Drill out rivet connections (1).
Raise side sections (2, 3).
Pull out lamp housing (4) towards inside in direction of platform.
RA Disassembly of left and right lamp housings
BMW AG - TIS
19.01.2013 16:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -