3 Series E30 318i (M10) SAL
Drive compensating bush (1) with a drift into spacer tube (2). Set
compensating bush (1) and spacer tube (2) centrally in trailing arm
mount (3).
Installation:
Make sure compensating bush (1) is not tilted when driven in.
Install coil spring,
refer to 86 10 ... Removing and installing coil spring.
RA Removing trailing arm, removing and installing or replacing mounting
BMW AG - TIS
19.01.2013 16:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -