3 Series E30 325i (M20) SAL
Attach injector valves to special tool 13 6 200 with special tool
13 6 205 .
Fill special tool 13 6 200 with cleaning concentrate 13 6 207
as specified by manufacturer.
Perform cleaning procedure as specified by manufacturer.
Repeat leak test on cleaned injector valves.
Caution!
Do not carry out leak test in cleaning concentrate but rather in
a water bath.
Only replace injector valves from which volume of air
emerging exceeds the permitted limit of 2 bubbles within a
15 second period.
Caution!
Install cleaned injector valves immediately in engine and run
engine.
This flushes out any remaining cleaning concentrate thereby
preventing injector valve corrosion.
Due to the risk of corrosion, cleaned injector valves can no
longer be stored.
RA Checking injector valves for leaks and cleaning
BMW AG - TIS
26.01.2013 11:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
