bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Normal Oscillogram (M, S, W Engines Only)|Page 510 > < 2 RA Checking Secondary Signal For Stationary Ignition Distribution
Page 1
background image

12 13 ...

Normal oscillogram (M, S, W engines only)

1. 

start of ignition voltage peak

2. 

Level of ignition voltage

3. 

Level of combustion voltage

4. 

Period of combustion

5. 

Combustion curve characteristics

6. 

Start of decay process

7. 

Termination oscillations

Secondary voltage patterns, beside one another:

Evaluation of ignition voltage peaks at idle speed (this example
shows an engine with 4 cylinders).

Note:

The display of ignition voltage spikes is approx. 20-25

%

 lower than

the real value.

The uniformity of all cylinders to each other is more important than
the height of ignition voltage peaks. Differences of
3000 ... 4000 V are permitted.

In event of greater differences, refer to 

"Further fault patterns with evaluation".

Evaluation of ignition voltage peaks at increased speed of approx.
2000 rpm (this example shows an engine with 4 cylinders).

Secondary voltage diagrams, superimposed:

Evaluation of combustion characteristics curve and decay
characteristics at idle speed (this example shows a 4-cylinder
engine).

RA  Normal oscillogram (M, S, W engines only)

BMW AG - TIS

17.01.2013  10:57

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Normal Oscillogram (M, S, W Engines Only)|Page 510 > < 2 RA Checking Secondary Signal For Stationary Ignition Distribution