3 Series E36 316i (M43) SAL
Rotate engine at central bolt in direction of rotation until the first
cylinder is at firing TDC.
Locate camshaft with special tool 11 3 190 in firing TDC position
of first cylinder.
Release chain wheel screws.
Carefully and slowly push back tensioning rail at hexagon until
strain is relieved from the timing chain.
Remove chain wheel.
RA Removing and installing/sealing cylinder head (M43)
BMW AG - TIS
20.01.2013 03:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -