3 Series E36 316i (M43) SAL
Heat fixed wheel to approx. 180
°
C (heating plate). Check with
thermometer.
Thermometer, refer to BMW Service Workshop Equipment
Planning documentation.
Position layshaft in a press.
Place fixed wheel on the layshaft and press firmly into place with
special tool 23 1 290.
Insert circlip (1).
Connect layshaft together with input and output shafts.
Attach 3rd/4th gear switch rod (1), 1st/2nd gear switch rod (2) and
5th/reverse switch rod (3).
RA Detaching and mounting all synchronizing devices S5D 200G/250G
BMW AG - TIS
20.01.2013 05:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 13 -