3 Series E36 316i (M43) SAL
Fill system with automatic transmission fluid,
Note:
Use special tool 24 0 080 for filling.
Car must be unloaded and stationary on a level surface.
Check fluid level with selector lever in position "P" and engine at
idling speed; top up fluid if necessary.
Never wipe off oil dipstick with a cloth which loses lint.
Check transmission fluid temperature with MoDiC or DIS.
Remove dipstick, check fluid level (H) and compare with table
below.
Oil Temperature
+
°
C
Oil Level = H in mm
Min.
20
3
25
5
30
8
35
11
40
13
45
14
50
16
55
17
60
19
RA Removing and installing/sealing or replacing both transmission oil pans (A4S 270
BMW AG - TIS
20.01.2013 05:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -