3 Series E36 316i (M43) SAL
61 31 996
Carrying out steering angle sensor
adjustment
Important!
In vehicles with active front steering, steering angle sensor
adjustment is integrated in the service function "Initial
operation/adjustment for active front steering" and must not
be carried out separately!
Note:
Steering angle sensor adjustment must be carried out:
•
after adjustment work on the front axle/steering
•
after all mechanical work on the steering system
•
E46 (AWD), E53, E83: after disconnection of battery
•
after replacement / coding / programming of the following
components:
•
Fixture for switches of steering column / switch cluster /
steering angle sensor
•
Dynamic Stability Control (DSC) control unit
•
Control unit active anti-roll stabilization (ARS)
Connect vehicle to BMW diagnosis system or
Software Service Station.
Select and carry out steering angle sensor adjustment under
Service functions.
RA Carrying out steering angle sensor adjustment
BMW AG - TIS
20.01.2013 05:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -