3 Series E36 316i (M43) SAL
Place sealing ring (8) - wide side facing downwards - and guide
(9) in face plate (3).
Position face plate (3) on dowel pins.
Replace O-ring (10).
Mount body - watching out for position of bores - and bolt on
holder.
Tightening torque = 16 ... 19 Nm.
After installing the vane pump, perform a function check,
refer to 32 41 009
RA Dismantling and assembling vane pump (ZF pump)
BMW AG - TIS
20.01.2013 06:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -