3 Series E36 316i (M43) SAL
34 21 600
Removing and installing or replacing left or
right wheel-brake cylinder
Note:
Remove brake shoes,
refer to 34 21 530
Apply pedal prop and depress brake pedal slightly. This prevents
brake fluid from escaping from expansion tank after brake pipes
have been disconnected (which would enable air to enter the
braking system).
Unscrew brake pipe (1) and plug with a rubber cap or nipple.
Unscrew bolts (2) and remove wheel-brake cylinder.
Installation:
Tightening torque,
refer to Technical Data
Bleed brakes.
Vehicle without ABS,
refer to 34 00 046
Vehicle with ABS,
refer to 34 00 047
RA Removing and installing or replacing left or right wheel-brake cylinder
BMW AG - TIS
20.01.2013 06:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -