3 Series E36 316i (M43) SAL
Apply an adhesive bead of original BMW windshield adhesive
approx. 15 mm high within the marked contact surface of the
shaped part.
Locate shaped part.
Shaped parts with clips:
If locating clips are fitted to shaped part, allow clips to engage.
Shaped part with bore:
If the shaped part has bores for retaining tabs, allow bores in
retaining tabs to engage in retaining tabs.
Shaped parts with clips:
After locating the shaped part, ensure that bores for retaining clips
are sealed and, if necessary, reseal them.
RA Installing shaped parts for cavity bulkheads, except for cover for side member
BMW AG - TIS
20.01.2013 07:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -