3 Series E36 316i (M43) SAL
Unscrew headless screws on both sides, pull out switch.
Disconnect plug connection.
Installation:
Check position of ignition-start switch in relation to steering-
wheel lock.
Check position of turn-indicator lever in relation to steering wheel.
Secure headless screws with varnish.
Caution!
After installation, carry out mechanical test (lock cylinder) and
electric operational check (e.g ignition, radio, etc.).
RA Removing and installing/replacing ignition starter switch
BMW AG - TIS
20.01.2013 08:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -