3 Series E36 316i (M43) SAL
Unclip covers.
Unfasten screws.
Remove cover.
Mask off cowl panel on inside and at edges with plastic sheet or
similar. This prevents the cowl panel from being scratched when
the wiper mounting bracket is removed.
Wrap driver's side wiper shaft in insulating tape to prevent
scratching cowl panel during removal.
Unscrew nuts.
Installation:
Tightening torque, 61 61 5AZ .
RA Removing and installing complete mounting bracket for windshield wiper system wi
BMW AG - TIS
20.01.2013 08:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -