3 Series E36 316i (M43) SAL
64 11 018
Adjust Bowden cable for ventilation flap
Remove glove box,
refer to 51 16 360
(Lim/Coupé/Cabrio)
Remove trim panel at bottom right.
Set air volume rotary switch (1) to "4".
Ensure that Bowden cable is clipped in correctly. Hold air volume
rotary switch (1) tight and push lever (2) back. This causes the
clipped in internal wire of Bowden cable to slide through the
retainer. Set air volume rotary switch (1) to "0". This causes the
internal wire to slip into correct position in the retainer.
(only compact)
Remove trim panel at bottom right. Set rotary knob (3) for
temperature adjustment to 12 o'clock.
RA Adjust Bowden cable for ventilation flap
BMW AG - TIS
20.01.2013 09:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -