3 Series E36 316i (M43) SAL
![background image](/bmw/3_Series_E36/316i_M43_SAL/page-1169002.png)
Unscrew screw and place water flange to one side.
Blow air into feed hose to prevent residual coolant in heater core
from running out on the carpet.
Caution!
Always replace O-rings.
Unscrew left and right bolts.
Cut off cable strap (2). Remove screws and remove reinforcement
pipe for steering column.
RA Removing and installing or replacing complete heater
BMW AG - TIS
20.01.2013 09:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -