3 Series E36 316i (M43) SAL
Method 2:
Insert a narrow screwdriver into recess (1) in housing (2).
Carefully prise cover (3) off (4).
Cover (1) is not positioned higher than housing (2).
The airbag plug connection is unlocked and can now be detached
from the gas generator/airbag module.
Installation:
After attaching airbag plug connection to gas generator/airbag
module, press cover (1) downwards until it rests flat on housing.
Check that it catches properly.
Airbag plug connection on gas generator/airbag module is
straight (2 versions)
Version 1:
Press locking/unlocking plate (1) at edge (4).
Locking/unlocking plate (1) snaps upwards at opposite edge (3)
and releases detent lug (2).
RA Unlocking/locking airbag plug connections
BMW AG - TIS
20.01.2013 09:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -