3 Series E36 318i (M42) SAL
Removing timing case and oil pump (M42)
Unscrew all bolts.
Lift off timing case.
Installation:
Check location of socket head bolts.
Upper left bore (1) is not used.
Tighten all bolts uniformly.
For tightening torque, refer to Technical Data
Installation:
Chain lubrication spray jet faces bolt.
Installation:
Replace seal.
Check dowel sleeves.
RA Removing timing case and oil pump (M42)
BMW AG - TIS
23.01.2013 08:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
