3 Series E36 318i (M42) SAL
Unfasten cable duct on lower section of manifold.
Remove oil dipstick guide.
Installation:
Check O-ring, replace if necessary.
Remove lower manifold support.
Unscrew manifold lower section.
Installation:
Replace seals.
Note dowel sleeves (3) and (4).
Unfasten engine section of wiring harness and place to one side
with cable duct.
The plug and screw connections are described in the section on
replacing the engine section of the wiring harness,
refer to 61 11 051
RA Removing and installing engine (M42)
BMW AG - TIS
23.01.2013 08:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
