3 Series E36 318i (M42) SAL
Version with screw cap:
Loosen the oil filter cap using special tool 11 7 331.
Note:
Oil flows from oil-filter housing into oil pan.
Installation:
Tightening Torque,
refer to Technical Data 11 42 2AZ.
Installation:
Replace sealing rings.
Check seals on special tool 11 7 332 and replace if necessary.
Instead of the oil filter cover, screw special tool 11 7 332 onto
the oil filter housing and tighten using special tool 11 7 331.
Tightening Torque,
refer to Technical Data 11 42 2AZ.
Connect special tools 13 3 061 / 063.
Start engine and check engine oil pressure,
refer to Technical Data.
RA Checking engine oil pressure (M40 / M42 / M43 / M43TU / M44)
BMW AG - TIS
23.01.2013 09:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -