3 Series E36 318i (M42) SAL
24 00 005
Adjusting selector lever (A4S 270R/ 310R)
Move selector lever (1) to "P".
Loosen nut (2).
Important!
In order to avoid deformation of the cable, it is absolutely essential to grip special tool 24 5 210 at the clamping
screw.
Special Tool 24 5 210 can be applied only in position P.
Press lever (3) forwards (park position).
Press cable rod (4) in opposite direction to travel, then release again.
Clamp cable rod (4) by tightening nut (2) (brace with special tool 24 5 210.
Tightening torque,
refer to Technical Data 25 16 1AZ/2AZ
RA Adjusting selector lever (A4S 270R/ 310R)
BMW AG - TIS
23.01.2013 10:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -