3 Series E36 318i (M42) SAL
Rubber mount with slot:
Arrow on special tool must point to colored spot (K)!
Draw in rubber mount with special tool 33 3 144 / 33 3 145
/ 33 3 222 / 33 3 227 / 33 3 228 and M12 nut (1) until
special tool 33 3 228 is slack.
Rubber mount with slot:
Remove special tool 33 3 228 .
Draw in rubber mount to distance (A) = 2.5 mm.
RA Replacing one front trailing arm rubber mount (trailing arm removed)
BMW AG - TIS
23.01.2013 12:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -