Replacing Upper Control Arm Rubber Mount for BMW E36 318i (M42) SAL: Step-by-Step Instructions
33 32 671
Replacing one rubber mount in the upper
control arm (control arm removed)
Press out rubber mount with special tool 33 3 351/352.
Place new rubber mount at chamfered end of control arm bore.
Longer collar (A = 17 mm) of rubber mount must point upwards
here.
Press in rubber mount with special tool 33 3 351/352 so that it
is flush.
RA Replacing one rubber mount in the upper control arm (control arm removed)
BMW AG - TIS
23.01.2013 12:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -