3 Series E36 318i (M42) SAL
51 12 000
Removing and installing complete rear
bumper
Unscrew bolts.
Unclip panel from inside and pull it off towards rear.
Only M3:
Lift out expansion rivets.
Unclip panel from inside and pull it off towards rear.
Installation note:
Clips must not be damaged.
Unscrew screw (1) and remove expansion rivets (2) on left and
right sides.
Lift off both wheel housing liners from bumper.
RA Removing and installing complete rear bumper
BMW AG - TIS
23.01.2013 13:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -