3 Series E36 318i (M42) SAL
Cut hole for the inlet to avoid tension on the cover.
Cut opening for door opener and mounting screws.
Also cut opening (1) for the outside mirror switch on the driver's
side.
Install and screw on new inlet.
Press all retainers (refer to BMW Parts) on the plastic pins.
Shorten all plastic pins to size (A) as otherwise the plastic sheet
would be damaged.
Distance (A) = 1 mm
RA Disassembling and assembling left or right front door trim panel
BMW AG - TIS
23.01.2013 14:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -