bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

12 Airbag Generator-airbag Unit For Pass > < 7 RA Removing And Installing Or Replacing All Rear Seat Belts (complete)
Page 2
background image

Installation:

Turning lock must engage. Install washers.

Tightening Torque, refer to Technical Data 72 11 1AZ.

Remove cover, refer to 51 47 030

Remove belt lock.

Installation:

Install washers.

Tightening Torque, refer to Technical Data 72 11 1AZ.

Remove cap (1).

Unscrew bolt (2) and remove together with shim (3).

Pull out end plate (4) to one side.

Pull out automatic reel.

Installation:

Automatic reel must snap into place in hooks at backrest
shelf.

Tightening Torque, refer to Technical Data 72 11 1AZ.

RA  Removing and installing or replacing all rear seat belts (complete)

BMW AG - TIS

23.01.2013  16:59

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

12 Airbag Generator-airbag Unit For Pass > < 7 RA Removing And Installing Or Replacing All Rear Seat Belts (complete)