3 Series E36 318i (M44) SAL
11 34 715
Replacing all valve springs - cylinder head
removed (M44)
Preliminary work is described in section on dismantling and
assembling the cylinder head,
refer to 11 12 503
Remove the camshafts,
refer to 11 31 501
Insert Special Tool 11 1 441 from below in Special
Tool 11 1 065 and secure with Special Tool 11 1 045.
Align Special Tool 11 0 345 in direction of valve shaft and
select appropriate groove in Special Tool 11 0 342.
Press down valve spring on spring cap, top, and remove valve
keys.
Remove valve spring and plate spring.
RA Replacing all valve springs - cylinder head removed (M44)
BMW AG - TIS
27.01.2013 02:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -