3 Series E36 318i (M44) SAL
11 28 010
Replacing alternator drive belt (M44)
Note:
If the drive belt are to be reused, mark the rotation direction
and reinstall the drive belt with the same rotation direction.
Remove fan coupling with fan wheel,
refer to 11 52 020
Remove the dust cab.
Push the tensioning device for the drive belt of the alternator back
on the bolt connection of the pulley.
Caution!
The bolt connection of the pulley for the tensioning device for
the drive belt has left-hand thread and is peened.
Only change the pulley in conjunction with the tensioning
device for the drive belt.
Remove drive belt.
Installation:
If necessary, apply preload to the tensioning device for the
drive belt as far as possible and lock with Special
Tool 11 3 340. This will make it easier to put on the drive
belt.
Caution!
The tensioning device for the drive belt is under high spring
pressure.
Press Special Tool 11 3 340 in as far as possible.
RA Replacing alternator drive belt (M44)
BMW AG - TIS
27.01.2013 02:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
