3 Series E36 318i (M44) SAL
Note:
At firing TDC, alignment bores are pointing upwards.
Fit Special Tool 11 3 240 to camshaft.
Note:
Special tool 11 3 240 must be flushly seated on the
cylinder head.
Adjust camshaft timing if necessary,
refer to 11 31 505
RA Checking timing of camshaft(s) (M44)
BMW AG - TIS
27.01.2013 02:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -