3 Series E36 318i (M44) SAL
Remove dust cover from locating bore.
Secure crankshaft in TDC position with Special Tool 11 2 300.
Position camshaft with Special Tool 11 3 240 in firing TDC
position of first cylinder.
Note:
Crankshaft and camshafts remain locked until assembly is
complete.
Remove the loosened central bolt and take out the vibration
damper.
Removing gear case cover, bottom,
refer to 11 14 110
Remove the hydraulic chain tensioner,
refer to 11 31 091
RA Replacing timing chain (M44)
BMW AG - TIS
27.01.2013 02:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -