3 Series E36 318i (M44) SAL
11 42 020
Removing and installing, sealing or replacing
main-flow oil filter (M44)
Unfasten oil filter cover to allow oil to flow out of main flow oil filter
housing and back into oil pan.
This operation is described in section on BMW engine oil service,
refer to 00 00 249
Removing alternator,
refer to 12 31 020
Unfasten vane pump for power steering unit from carrier (lines
remain connected).
Remove alternator carrier.
Remove full-flow oil-filter housing.
RA Removing and installing, sealing or replacing main-flow oil filter (M44)
BMW AG - TIS
27.01.2013 02:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -