3 Series E36 318i (M44) SAL
11 61 040
Removing and installing upper section of
manifold (M44)
Remove Bowden cable for throttle actuation from throttle body.
This operation is described in section on removing and installing /
sealing throttle body,
refer to 13 54 030
Loosen the manifold support in front.
Remove the rubber gaiter from the throttle valve.
Remove connector for throttle potentiometer.
Pull off hose for tank ventilation.
Disconnect adapter from brake booster.
Loosen the manifold support in back.
Release and remove collector upper housing.
RA Removing and installing upper section of manifold (M44)
BMW AG - TIS
27.01.2013 02:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
