3 Series E36 318i (M44) SAL
12 12 011
Replacing spark plugs (M44)
Remove cover from cable channel.
Remove spark-plug connectors.
Unscrew and remove spark plugs with Special Tool 12 1 171.
Installation:
Tighten the spark plugs using Special Tool 12 1 171 in
conjunction with Special Tool 12 1 200.
If Special Tool 12 1 200 is not used, note tightening torque,
refer to Technical Data 12 12 1AZ
Note arrangement of ignition leads in cylinder head cover.
RA Replacing spark plugs (M44)
BMW AG - TIS
27.01.2013 03:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -