3 Series E36 318i (M44) SAL
13 54 030
Removing and installing/sealing throttle body
(M42, M43, M44)
Unfasten screw and remove cover (1).
Unscrew and disconnect cables (1 and 2, if applicable).
1 to accelerator pedal
2 to actuator motor on cruise control
Installation:
Adjust cable,
refer to relevant Construction Group 35/65
Unfasten hose connector (1) and remove gaiter.
Remove air flow sensor or mass air flow sensor with upper section
of intake filter housing.
Pull off connector from throttle-valve switch.
RA Removing and installing/sealing throttle body (M42, M43, M44)
BMW AG - TIS
27.01.2013 03:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -