3 Series E36 318i (M44) SAL
M44:
Loosen retainers (1). Disconnect connector (2). Unfasten hose clip
(3). Remove upper section of intake filter.
Remove upper sectin of air-filter housing with air-flow sensor and
gaiter.
Installation:
Secure the lead and cable clips.
Unscrew nuts.
Unclip and remove lower section of housing.
Installation:
Install suction snorkel and install lower section of housing in
rubber mount.
RA Removing and installing intake filter housing (M42, M43, M44)
BMW AG - TIS
27.01.2013 03:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
