3 Series E36 318i (M44) SAL
Remove trim for selector lever.
Pull plug (3) on EGS switch and indicator light (4).
Installation:
Adjusting display slide of trim:
-
Press adjuster (1) of display slide (2) against stop (3).
-
Position opening of trim (4) over opening of display slide (2).
-
Move preselector lever to "N" (NORMAL) position.
-
Insert trim on preselector lever and install.
-
Move preselector lever to "P" (PARK) position.
-
Display slide (2) is now adjusted.
Pull plug (6).
Lever out retainer (7).
Remove cable from counter support and detach towards front.
Unhook cable from eye.
Installation:
Insert turning lock with bore hole in nubs.
Mount cable in this position.
RA Removing and installing selector lever with mounting block - version with interl
BMW AG - TIS
27.01.2013 04:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
