3 Series E36 318i (M44) SAL
Carefully insert rack in pipe to avoid damage to
1. the internal radial shaft seal by the spline and
2. the piston race (2).
Fit bearing bush to rack and slide into pipe.
Fit circlip with open side opposite to leakage oil bore.
Replace piston rings (1) and O-rings (2) beneath them.
Insert new radial shaft seal (3) - open side upwards - in bearing
bush (1) and drive firmly home with special tool 32 1 140 /240
/250.
Replace O-ring (2).
RA Dismantling and reassembling power steering gear
BMW AG - TIS
27.01.2013 05:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
