3 Series E36 318i (M44) SAL
72 12 010
Removing and installing/replacing airbag
module on left or right front door
Caution!
Note safety regulations for handling airbag modules and
pyrotechnical seatbelt tensioners,
refer to MG 72
Incorrect handling can activate airbag and result in injury.
Removing and installing front left or right door trim,
refer to 51 41 000
Caution!
Plug connector for side airbag (adapter lead) is not
marked "Orange or Yellow"
and
is not designed as a special airbag plug connector!
Airbag module with connection on rear side
Disconnect adapter line from side airbag module to door wiring
harness at plug connector (1).
Unfasten screws (2).
Remove airbag module (3).
To prevent damage to the plug connector on the airbag module,
the following assembly sequence must be observed:
-
Connect adapter line from side airbag module to plug
connector of door wiring harness on side airbag module
-
Caution!
RA Removing and installing/replacing airbag module on left or right front door
BMW AG - TIS
27.01.2013 07:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -