3 Series E36 318i (M44) SAL
51 33 020
Removing and installing/replacing flat motor
for front left or right electric window lift
Necessary preliminary tasks:
•
Remove electric window left in front door.
Important!
When replacing the window lift, you must also replace the
corresponding sleeve (1 or 2) depending on the flat motor
version.
Loosen screws (1).
Detach flat motor (3) from window lift (2).
Installation:
Fit sleeve (4 or 5) between flat motor and window lift (risk of
damage).
Check sleeve (4 or 5), depending on flat motor version, for
damage; replace if necessary.
Tightening torque, 51 33 1AZ .
Check function.
RA Removing and installing/replacing flat motor for front left or right electric wi
BMW AG - TIS
27.01.2013 08:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
