3 Series E36 318is (M42) SAL
Connect special tool 13 6 056/057 (T-piece) to special tool 13 6
055 (reducer) and special tool 13 6 051 (hose with quick release
coupling).
Connect special tool 13 6 051 with fast-release coupling to
pressure sensor on DIS.
Caution!
Note when removing special tool! Fuel in fuel lines is under
pressure (approx. 3 bar)! Catch and dispose off escaping fuel.
For subsequent tests, prepare special tool 13 3 010.
For subsequent procedure with tests, refer to
13 31. . .Fuel pressure test
With quick-release couplings on fuel filter:
Unfasten screws and remove cover of fuel filter.
Open quick-release coupling (1) of fuel hose to injector strip on
outlet of fuel filter (1).
Install special tool 13 5 270 between fuel filter and disconnected
fuel hose (2).
Connect DIS pressure sensor (3) to special tool 13 5 270.
For further test procedures, refer to
13 31. . . Fuel-pressure Test
RA Checking fuel delivery pressure of fuel pump (M20,M30,M40,M42,M43, M44,M52,S38,S
BMW AG - TIS
30.01.2013 14:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -