3 Series E36 318is (M42) SAL
33 32 042
Replacing a rubber mount in semi-trailing
arm, front
Caution!
After completion of work, perform chassis alignment check,
refer to 32 00 150.
Remove wheel,
refer to 36 10 300.
Unfasten screws.
Unfasten screws and pull trailing arm downwards.
Further work,
refer to 33 32 520.
Installation:
Tightening Torque,
refer to Technical Data 33 32 13AZ.
Note:
Damaged threads in bushes on body side can be repaired with
Helicoil thread inserts M 12 X 1.5 X 18. The Helicoil thread
inserts must be fitted flush with the original thread.
RA Replacing a rubber mount in semi-trailing arm, front
BMW AG - TIS
02.02.2013 16:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -