3 Series E36 318is (M42) SAL
Correcting:
Tension:
Loosen nuts on hinge (1).
Correct the quantity and/or thickness of shims. Tighten nuts.
Tightening Torque = 21 Nm
Height:
Loosen nuts on hinges (1 and 2) and move door upwards or
downwards. Tighten nuts.
Tightening Torque = 21 Nm
Recheck and, if necessary, correct previously made adjustments.
Caution!
The windshield and/or paint finish could be damaged when
shutting front doors due to overlapping of unfavourable
installation dimensions/tolerances.
Consequently always shut doors carefully and check whether the
door frame touches the windshield or roof frame.
If necessary, paste cloth adhesive tape on the edge of the
windshield.
Lower door window. Adjust height of door roughly when installing
new doors.
Gap (A): approx. 5 mm uniformly.
Tighten nuts on upper and lower door hinges.
Tightening Torque = 21 Nm
RA Aligning front doors
BMW AG - TIS
02.02.2013 18:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -