3 Series E36 318is (M44) COUPE
11 25 530
Removing and installing or replacing all
pistons (M44)
(engine removed)
Removal
Removal of pistons is described separately from installation.
Assembly sequence for removal and installation is different.
Removing cylinder head,
refer to 11 12 500
Removing oil pan,
refer to 11 13 500
Caution!
Re-install piston, connecting rod and bearing shells back in
the same position and in the same installation location.
Connecting rods and bearing covers are designated with the
same pair number: do not mix them.
Caution!
Injection nozzles for cooling the pistons are installed on the
underside of the cylinder between the bearing seats.
Be careful not to damage the spray nozzles for cooling the
pistons when removing the pistons.
In order to avoid the possibity of injury from the piston or
connecting rod, the location of spray nozzles is equipped with
special tool 11 7 320.
RA Removing and installing or replacing all pistons (M44)
BMW AG - TIS
05.02.2013 04:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
