3 Series E36 318is (M44) COUPE
The designations of the bearing covers can be read on the intake
side.
E1 ... E5 for the intake side.
A1 ... A5 for the exhaust side.
Fit the bearing cover and tighten down.
Tightening torque,
refer to Technical Data 11 31 1AZ
Install chain guide.
Position the camshafts using Special Tool 11 3 240 in firing
TDC position of first cylinder.
Note:
At firing TDC, alignment bores are pointing upwards.
RA Replacing camshaft (M44)
BMW AG - TIS
05.02.2013 04:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
