3 Series E36 318is (M44) COUPE
11 12 595
Checking one valve guide for wear (M44)
(valve removed)
To measure tilt clearance, insert new valve so that valve stem end
is flush with valve guide.
Mount dial gauge and measure tilt clearance.
Note:
Maximum permitted tilt clearance,
refer to Technical Data
Note:
If tilt clearance is excessive, the valve guide should be
reamed and a repair valve with a larger shaft diameter,
refer to Technical Data,
should be installed.
If necessary, ream out valve guide,
refer to 11 12 600
RA Checking one valve guide for wear (M44)
BMW AG - TIS
05.02.2013 04:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -