3 Series E36 318is (M44) COUPE
Installation:
To prevent damage to the vacuum hose, ensure that recess
(3) is aligned with vacuum connection (4).
Turn fuel pressure regulator and remove.
Installation:
Replace sealing rings (1) and (2). When replacing, observe
nominal pressure stamped on fuel pressure regulator; only
regulators with the same nominal pressure may be fitted.
Further information on troubleshooting in:
Check fuel delivery pressure,
refer to 13 31 029
Version 3:
If secured by a circlip:
Pull off vacuum hose (1).
Remove circlip (1).
RA Replacing fuel pressure regulator (M42, M43, M43TU, M44)
BMW AG - TIS
05.02.2013 05:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -